Skip to main content

Euroreels

How to Choose a Water Hose Reel

Pressure, temperature, hose, drive and material: how to choose an industrial water hose reel.

An industrial water hose reel has to match the water pressure, the temperature, the hose and the place where it is mounted. Getting these right avoids leaking swivels, kinked hoses and reels that corrode within a season. Here is how to choose one, step by step.

1. Pressure and temperature

Check the working pressure at the wash point and the water temperature. Euroreels water hose reels are rated up to 400 bar (5,800 psi) and from -25 °C to +105 °C (-13 °F to +221 °F), which covers both low pressure washdown and high pressure cleaning. The hose and its fittings must be rated for the actual conditions.

2. Hose length and diameter

Measure the reach from the mounting point to the farthest point you need to wash, then add 2 to 3 m (7 to 10 ft). A larger hose diameter delivers more flow on long runs but makes the hose heavier, which affects the drive you need. Spring reels carry up to 100 m (328 ft) of hose, electric motor reels up to 1,000 m (3,280 ft), depending on the hose.

3. Drive

DriveBest for
Spring rewindWash points used many times a day; short to medium hoses; ratchet lock holds the length
Manual (hand crank)Long hoses used now and then; no power needed
Electric motorLong or heavy hoses; 220 V / 380 V AC for fixed sites, 12 / 24 / 48 V DC for vehicles

4. Material

Steel reels with powder coating suit most indoor and covered sites. For food and beverage plants, washdown areas and marine use, choose SS304 or SS316 stainless steel; SS316 is the better choice near seawater. The shaft is stainless steel as standard and the swivel is CuZn37 brass, so the whole fluid path is rust-free.

5. Mounting and outlet

Wall mounting suits wash points in plants and wash bays; vehicle and trailer reels are bolted to the chassis or a frame. Choose the hose outlet direction, up or down, so the hose leaves the reel without a sharp bend.

6. Frost and draining

Water left in the hose and swivel can freeze and crack fittings. On outdoor and vehicle reels, drain the hose and the reel before frost, or keep them in a heated area.

Quick checklist

  • Working pressure and water temperature
  • Hose inner diameter, type and length
  • Drive and power supply (AC or DC)
  • Steel or stainless steel
  • Mounting position and outlet direction
  • Indoor, outdoor, vehicle or marine use

See our industrial water hose reels, food and beverage reels and the manual stainless steel hose reel.

Frequently asked questions

Which water hose reel is best for a food plant?

A stainless steel reel (SS304 or SS316) with a spring rewind, wall mounted at each washdown point.

Can a water hose reel be used with hot water?

Yes, up to +105 °C (+221 °F), as long as the hose and fittings are rated for the temperature.

Can a water hose reel be fitted to a truck?

Yes. Spring reels and 12 / 24 V DC motor reels are common on service, municipal and cleaning vehicles.

Questions about your reel? Send the hose size and length, pressure, water temperature and mounting to info@euroreels.com or call +90 312 911 13 32 (also on WhatsApp).